 |
|
|
Water & Gas Pipes
Field of Application |
Transmission of liquid, air and non-aggressive gas, plumbing, radiation heating,sprinkler system, air-conditioning, irrigation systems |
Production Standarts |
EN 10255 / EN 10240 (H - M - L - L1 - L2) DIN 2440 / DIN 2441 / DIN 2444 ISO 65 (Light 1-Light 2, Medium, Heavy) BS 1387 (Light, Medium, Heavy) NFA 49 145 (Light, Medium, Heavy) ASTM A 53, ASTM A 795 UNI 8863 (Light, Medium, Heavy) Other standards upon request |
Steel Grades |
S 195/ EN 10027-1 EN 10025 S 235 / S 275 DIN 17100 St 37.2 / St 44.3 ASTM A 53 Gr A / B |
SIZES |
|
Outside Diameter |
17.2 mm - 406.4 mm |
Wall Tickness |
2.0 mm - 12.70 mm |
Length |
6-12 meter (supplied in 6 meter length unless otherwise specified) |
Surface Protection |
Outside protective coating: Oiling, Varnishing, Polyethylene, red-primer, bitumen, Hot dip galvanizing |
End Finishing |
Plain End ( square cut or bevelled ) Threaded and coupled |
Marking |
On pipe: Paint-marking, die stamping On bundles: Information Tags |
Packing |
In hexagonal bundles or loose pieces (large diameters) bare or wrapped in p.p woven fabric |
Test Performed |
Leak Tightness Testing: Hydrostatic pressure Test, Eddy Current Destructive Product Tests:Flattening, Bending, Enlarging Raw Material Tests: 1) Chemical Analysis of Raw Material 2) Mechanical tests(tensile, yield, elongation) Others as required by the standards |
Mill Test Certificates |
Issued upon request according to EN 10204 ( DIN 50049) 2.2; 3.1 A/B/C |
|
|
